Showing posts with label Pressure. Show all posts
Hydraulic JCB
Pascal's LawThe Pascal's law states that if pressure is applied
at any one point in an enclosed liquid, that pressure is equally
transmitted in all directions within the liquid.
Material required: Plastic syringes, vinyl tubing, wooden strip, skewers, String, etc…
Different Models:


Material required: Plastic syringes, vinyl tubing, wooden strip, skewers, String, etc…
Description: The basic mechanics behind hydraulics is
transferring kinetic energy from one piston to another by pushing water
through the tubing.
Different Models:


Flame Standing Wave Tube (Rubens' tube)
The Ruben's Tube is a physics experiment demonstrating a standing wave. Invented by German physicist Heinrich Rubens in 1905.
Material required : A Long Metal Tube (Perforated along the top), Speaker or Frequency generator, Gas Cylinder, Lighter, etc
Different Models:




Material required : A Long Metal Tube (Perforated along the top), Speaker or Frequency generator, Gas Cylinder, Lighter, etc
Description: A length of pipe is perforated along the top. One ends of pipe is attached to a speaker or frequency generator, and other end connected with Gas Cylinder. When you switch on the gas supply, the pipe is filled with the gas, and the gas leaking from the perforations. Light the gas with the help of lighter.
When the speaker is turned on, it sends a series of waves of air down the tube at the speed of sound, these then reflect off the far end of the tube, so there are two sets of waves moving through the tube in opposite directions. For most wavelengths this does not produce a very interesting effect, but when the length of the tube is a multiple of half the wavelength the two waves add together to form what is known as a standing wave. This standing wave can be seen directly as differences in the height of the individual flames.
Notes : The tube can become very hot during Experiment.
For safety reasons, the Rubens Tube was set up outside.



Hydraulic Bridge
The Pascal's law states that if pressure is applied at any one point in an enclosed liquid, that pressure is equally transmitted in all directions within the liquid.
Hydraulic systems use a incompressible fluid, such as oil or water, to transmit forces from one location to another within the fluid.
Material required: Plastic syringes, vinyl tubing, Bridge Model, etc
Description:The basic principle behind any hydraulic system is Pascal’s
Law.
"Pressure
applied anywhere to the body of fluid causes a force to be transmitted
equally in all directions, with the force acting at right angles to any
surface in contact with the fluid."
We can demonstrate the hydraulic bridge using simple plastic syringe for cylinders and small plastic tubing for the hydraulic hose.
Different Models:



Hydraulic Crane
Pascal's Law
The Pascal's law states that if pressure is applied at any one point in an enclosed liquid, that pressure is equally transmitted in all directions within the liquid.
Material required: Plastic syringes, vinyl tubing, wooden strip, skewers, String, etc…
Description: The basic mechanics behind hydraulics is transferring kinetic energy from one piston to another by pushing water through the tubing.
Different Models:



The Pascal's law states that if pressure is applied at any one point in an enclosed liquid, that pressure is equally transmitted in all directions within the liquid.
Material required: Plastic syringes, vinyl tubing, wooden strip, skewers, String, etc…Description: The basic mechanics behind hydraulics is transferring kinetic energy from one piston to another by pushing water through the tubing.
Different Models:



Bottle submarine shows how buoyancy tanks work.
Investigate
how submarines dive and surface by changing their buoyancy in the water.
The first thing you need to do is cut 2/3 small holes out in the bottom of
your sub. Then tape 4 or 5 heavy coins/ washers to either end. This will add
weight to the craft and keep the holes facing the bottom. The next thing we
need to do is attach a straw to the bottle top with clay. Place the short end
of the flexible straw in the bottle and then take your clay and mold it all
around the top of the bottle and the straw. Make sure there are no gaps for
water to get in. To allow the sub to
deep dive, add a length of plastic tubing to the end of the straw.
Once launched, the submarine will start to sink as water floods
through the holes along the bottom. Keep
the end of the plastic tube above the waterline at all times. Blow through the
tube to fill the submarine with air. It will start to rise as the water gets
blown out. With practice you will be able to make the submarine float at any
depth you wish.