About Me
Showing posts with label Pendulum. Show all posts
Solar pendulum
Solar pendulum is electromagnetically assisted pendulum also known as magbot pendulum
Material required: Neodymium magnet, LED, Coil, Solar cells, Electrolytic capacitors (3300uF and 1000uF), transistors (2N3904 and 2N3906), resistors (100kΩ), diode (1N914), Copper wire, etc.
Circuit diagram: Built the circuit as shown in figure below
Description: Solar cell provide the sufficient DC voltage to the circuit. The Force-Coil circuit uses the motion of the swinging magnet over the coil.
Different Models:
Chaotic Magnetic Pendulum
The attraction and repulsion of magnets produces unpredictable motion.
Material required: Number of magnets, Stand, String, etc.
Material required: Number of magnets, Stand, String, etc.It consists of a pendulum, with a small magnet attached to the end, which can swing freely over a metal base. On the base there are any number of strong, disc-shaped magnets, which act on the pendulum with either an attractive or repulsive force. When the pendulum is displaced and released, it tends to swing in an erratic, unpredictable pattern.
Different Models:
Newton's Cradle
Newton's cradle demonstrates conservation of momentum and energy
Material required:Equally weighted Ball, String, Stand etc.
Description:A
typical Newton's cradle consists of a series of identically sized metal balls
suspended in a metal frame so that they are just touching each other at rest.
Each ball is attached to the frame by two wires of equal length angled away
from each other. This restricts the pendulums' movements to the same plane.
Different Models:
Tag :
Classical mechanics,
Pendulum,
